PLANET NVR-1620 - Manual (Page 31)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
31
Its corresponding information should be displayed in the “Camera Information”
section. Enter its username and password and select the channel ID and name
the camera.
Click on “Detect” to establish connection between the recorder and the camera.
If connection establishes successfully, camera’s detailed information should be
polled and displayed as shown below. Adjust its video format, frame rate,
resolution or bitrate, etc. if you wish and then click “Add” to finish adding the
camera
4.6.2 Adding a Camera Manually
Simply follow the instruction described above but instead of using the “Search”
function, enter the camera’s IP address and credential in the “Camera