PLANET NVR-1620 - Manual (Page 112)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
112
You can create up to 8 preset points for each channel if it's a PTZ-capable
camera. To add a preset point:
1. Select a channel from the "Channel" list and its video will be displayed at the
lower-left hand corner.
2. Click on the video to change its pointing direction.
3. Assign a name to this preset position.
4. Click "Add" to add it.
5. Click "Apply" to save the settings.
Once you have multiple preset points defined for a camera, it is convenient for
monitoring to set up the sequencing viewing among those preset points and let
the recorder automatically switch between them for you.