PLANET NVR-1620 - Manual (Page 71)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
71
To configure preset sequence for a camera,
1. Select a channel from the “Channel” drop-down menu. The available preset
points should be listed in the “Camera Presets” section.
2. Pick the ones you like for sequence viewing and press the “->” button to
move them to the “Preset Sequence” section, then
3. Use the Up and Down buttons to adjust their sequencing positions.
4. Finally, select a dwell time from the drop-down menu and click “Apply” to
save the configuration
8.4 E-Map Setting
8.4.1 Local E-Map Setting
E-Map monitoring is a function that alerts users whenever there is an event
triggered (e.g. motion detected) from a camera with a geographical
perspective. With this function, users can quickly identify which camera has
detected an unusual event and where this event is happening. This function
works by incorporating the event detection function as well as the recording
function, which, as a result, helps users take all the necessary actions when an
unusual event occurs.