PLANET NVR-1620 - Manual (Page 12)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
Chapter 2.
Hardware Interface
2.1 Physical Descriptions
Front Panel
NVR-1620
NVR-820
LEDs
Status Definitions
Green Solid green when the HDD is mounted
Red Solid red for disk fail
HDD x 2
Amber
Solid amber when recording is in process
Blinking when recycling
Green Solid green for activity on a 10/100Mbps network
Network
Amber Solid amber for activity on a 1Gbps network
Solid green for normal operation
Blinking green when firmware upgrade is done
Green
12
Red
Blinking red for failed firmware upgrade through USB
disk Status
Amber Blinking amber during firmware upgrade
Solid green - Normal operation
Blinking in green after pressing and holding the reset
button for 5 seconds indicating the device will enter
the restore default process. Other LEDs remain
unchanged during this state.
Green
Red System off (power cord remains plugged in)
Power
Amber
Fast blinking - During system initializing/starting.
Continuous blinking - When system is unable to start
properly (All other LEDs should be off when this LED