PLANET NVR-1620 - Manual (Page 14)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
2.2.1 Installing Hard Disk
1. Remove the screws on both sides (1 on each side) and remove the top case
by pulling it toward you.
2. Place the HDD in the tray on the left. Slide it in until it is securely connected
with the SATA connector.
3. Secure the HDD with the tool-less screw on the right side and the other
screw on the left side, which can be found in the accessory box.
14