PLANET NVR-1620 - Manual (Page 13)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
is blinking in amber)
Slow blinking - The system is shutting down. Other
LEDs go off according to the stages of the process.
Blinking in red when a system/camera event occurs.
Blinking should last 10 seconds for each event
Red
Alarm
None
Goes off if reaches the 10-second duration, or when
buzzer stop button is pressed (if buzzer is triggered)
Buttons Status Definitions
ON Press and hold for 2 seconds
Power
OFF Press and hold for 2 seconds
Restore
default
Press and hold for 5 seconds
Reset
Restart Press and hold for 2 seconds
Buzzer
Stop
STOP Press and release to stop buzzer right away
Buzzer Status Definitions
Complete
start
Beep once (indicating the system is fully started)
Initiating
restart
Beep once (Indicating the restart process has begun)
Beep
Initiating
shutdown
Beep once (Indicating users to release the Power
button
as the shutdown process has begun)
Real Panel
Connector
Description
Ethernet 10/100/1000Mbps network.
Connect your USB flash disk for firmware upgrade and
backup.
USB
Video VGA / HDMI
Audio Line in / Line out / Mic
Power Supply 100~240V AC, 1.4A / Max. 50 / 60Hz
2.2 Hardware Installation
13