PLANET ICA-2250VT - Manual (Page 58)

Industrial PoE Plus Outdoor IR IP Camera
ICA-2250VT
58
NTP Sync. Interval
Select an interval between 1 and 23 hours at which you want to
adjust the device’s time referring to NTP server
Time Zone
Set the time difference from Greenwich Mean Time in the area
where the device is installed.
Daylight Saving Check this item to enable daylight saving adjustment.
Daylight Saving
Start Time
Sets up the date and time of daylight saving start time.
Daylight Saving
Stop Time
Sets up the date and time of daylight saving stop time.
Daylight Saving
Offset
Sets up the date of daylight saving offset.
3.7.3 Maintenance
Function Description
Default Settings
(Including the network
setting)
Recall the device hard factory default settings. Note that by
clicking this button, it will reset all device’s parameters to the
factory settings (including the IP address).
Default Settings
(Except the network
setting)
The unit is restarted and most current settings are reset to
factory default values. This action will not reset the network
setting.