PLANET ICA-2250VT - Manual (Page 47)

Industrial PoE Plus Outdoor IR IP Camera
ICA-2250VT
47
Function Description
RTSP Port
Choose the RTSP port. The RTSP protocol allows a connecting client to
start a video stream. Enter the RTSP port number to use. The default value
is 554.
RTP Port
Specify the range of transmission port numbers of video stream. The
default range is 50000 to 50999. User can specify a number between 1024
and 65535.
• Dialing procedure
a. Choose a verified player (PacketVideo, QuickTime or Real player
currently)
b. Use the following URL to access: rtsp://host/mpeg4/media.3gp
where host is the host name or IP address of the camera.
• Compatible 3G mobile phone
Please contact your dealer to get the approved list of compatible 3G
phones.
1. To use the 3GPP function, in addition to the previous section, you might need
more information or configuration to make this function works.
2. The camera must be set as multi-profile mode, not mega-pixel mode.
Otherwise, this device cannot serve 3GPP streaming.
3. To use the 3GPP function, it is strongly recommended to install the Networked
Device with a public and fixed IP address without any firewall protection.
4. Port 554 is the default for RTSP service. However, sometimes, some service
providers change this port number for some reason. If so, user needs to
change this port accordingly.
3.5.7 UPnP
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled Internet Camera. If your operating system is UPnP enabled, the device will automatically
be detected and a new icon will be added to “My Network Places.” If you do not want to use the
UPnP functionality, it can be disabled
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available from
the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to
an external HTTP port in the NAT router will be forwarded to the device.