PLANET ICA-2250VT - Manual (Page 54)

Industrial PoE Plus Outdoor IR IP Camera
ICA-2250VT
54
3.6.3 PTZ Setting
This page allows user to modify the RS-485 interface according to the P/T scanner.
Function Description
Camera Protocol
This device can connect to a PTZ camera or speed dome camera and
controls them through RS-485 interface.
Camera Address
This is the camera ID set in PTZ camera or speed dome camera.
Please DO NOT change the default value if
unnecessary. If so, user needs to check and set value
properly for both sides.
Baud Rate
This is the communication speed between network module and P/T
scanner.
If these parameters need to be changed, user needs to check and set value properly for
both the network module and P/T scanner.