PLANET ICA-2250VT User Manual
Page 12
Industrial PoE Plus Outdoor IR IP Camera
ICA-2250VT
12
Rear View
Interface
Description
DC Power
(Power Jack)
The input power is DC 12V, 1A.
The power supply from 802.3at PoE module.
LAN
(RJ-45 socket )
Connect to PC or Switch.(For connection to 10Base-T /
100Base-TX and 1000 Base-T Ethernet cabling)
This Ethernet port built auto-negotiation protocol can detect or
negotiate the transmission speed of the network
automatically. Please use CAT-5 cable to connect the Network
Camera to a 100Mbps Fast Ethernet network switch or hub.
Power LED (orange color)
This LED is used to indicate whether DC power is on or not.
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet
Audio Out
(Audio Output)
Connect a loud speaker to the IP Camera.
This is for voice alerting and two-way audio.
Mic In
(Microphone Input)
Connect a microphone to the IP Camera.
Micro SD
(Micro SD Card Slot)
User can insert a micro SD card into this slot for recording.
BNC Connector
(Video Output)
The Network Camera also provides composite video output.
The video output function is only for easy installation to check
view angle and focus. Furthermore, only “720p Mode”
supports this function.