PLANET ICA-2250VT - Manual (Page 14)

Industrial PoE Plus Outdoor IR IP Camera
ICA-2250VT
14
2.2 Hardware Installation
2.2.1 Use the wrench from the wall mounting kit to counterclockwise release the screw and
protective cap.
Counterclockwise
release protective
cap Counterclockwise
release screw
2.2.2 Slide an RJ-45 cable without its plug through the stand and the protective cap. Then fix the
RJ-45 plug and connect it to the connector of the PoE module. Please note that the whole RJ-45
cable (with the plug) cannot go through the protective cap. When the setup is completed, user can
use PoE tester to test PoE module to check whether the LED works or not.