6 adjust the image – PLANET HDVR-1600 User Manual

Page 53

The following functions are disabled in sequence mode:

1. Right click to see channel menu

2. Zoom

In/Out

3. Drag and drop channels or sites to the display grids

4. Remove any channel grids on the display windows

NOTE:

If you enabled the and an event is triggered while running the

sequence, the HCMS will display event full screen. The sequence will not resume until event

full screen ends.

Click on the icon or the icon to exit the sequence mode

7.6 Adjust the Image

Both the HCMS and the HCMS player provide image adjustment function. Double click on a channel,

then right click on it. Select from the pull-down menu, and the image adjustment

window will be displayed. You can change the brightness, saturation, hue, and contrast of the channel.

NOTE:

The option will only be available when viewing single-channel

screen.

Click the button to reset the value to the original preset.

NOTE:

The function has no effect on the recorded video. Whatever

changes made to the will not be applied to the recorded video.