3 setup the dvr site manually, Setup the dvr site manually – PLANET HDVR-1600 User Manual
Page 28

Search UPnP devices:
Check the box in front of “Search UPnP Devices” and click
devices within the LAN. While the search is in process,
option will be grayed out and cannot be clicked or selected, in addition the window cannot be closed.
work only after the searching process is done. If the user double clicks on the list or tries to close the
window, a warning message will be shown.
6.2.3 Setup the DVR Site Manually
If the detailed information (IP address, port, username, and password) of the connected DVR is
provided, a site can be setup manually.
Add a new site and enter the Name, IP address, Port, Username, and Password. Select “DVR” and
click
NOTE:
If the entered Username and Password is a user account instead of an administrator
account, the same DVR account restriction will be applied. When a user account accessed a
function that is restricted, the following message will be shown:
If the DDNS information of the DVR is known, the DDNS data can be used to setup a site. Check the
box <(D)DNS> circled below, and type in the DDNS data. Click
example of the DDNS address looks like:
*******.ddns.iview-ddns.com
-
28
-