PLANET WDRT-730 - Manual (Page 71)

User Manual of WDRT-730
-64-
Time Start / Time Stop Configure the specific time period that you would allow the specified
computers to access the Internet.
Table 5-32
5.2.7.2. Access Control
You can allow or deny some computers with specific MAC address from connecting to the network; or
allow or deny some computers with specific IP address, protocol, or port.
Figure 5-45
Enable MAC Address Filtering:
Please select ‘Deny all’ or ‘Allow’ to decide the behavior of MAC filtering table.
Object Description
Client PC MAC
Address Please input the MAC address of the computer or network device you
want to limit to here. (i.e. If the MAC address label of your wireless
device indicates ‘aa-bb-cc-dd-ee-ff’ or ‘aa:bb:cc:dd:ee:ff’, just input
‘aabbccddeeff’
Computer Name Pull down the menu and all the computers connected to the router will be
listed here. You can easily select the computer name without checking
the MAC address of it.
Comment You can input any text here as the comment of this MAC address, like
Meeting Room Computer. You can input up to 16 alphanumerical