PLANET WDRT-730 - Manual (Page 13)

User Manual of WDRT-730
-6-
1.4 Product Specification
Product
WDRT-730
300Mbps Dual Band 802.11n Wireless Gigabit Router
Hardware Specification
WAN Port: 1 x 10/100/1000Mbps Auto MDI/MDI-X RJ45 port
Interface
LAN Port: 4 x 10/100/1000Mbps Auto MDI/MDI-X RJ45 ports
Gain: 2 x 3dBi fixed antenna
Antenna
Orientation: Omni-directional
Radio Button Radio On/Off button at rear panel
Reset / WPS Button
Reset / WPS button at rear panel
Press for more than 10 seconds to reset the device to factory default.
Press for less than 5 seconds once to activate 2.4GHz wireless WPS function.
Press for less than 5 seconds twice to activate 5GHz wireless WPS function.
LED Indicators
PWR
WLAN (2.4G & 5G) x 2
LAN (Link & 1000Mbps ) x 8
WAN (Link & 1000Mbps) x 2
Material Plastic
Dimension (W x D x H) 170 x 110 x 32 mm (W x D x H)
Weight 250g
Power Requirement 12V DC, 1A
Wireless interface Specification
Standard Compliance with IEEE 802.11a/b/g/n
Frequency Band 2.4GHz & 5GHz
Transmission
Distance
Indoor up to 100m
outdoor up to 300m (it is limited to the environment)
RF Power
(Intentional Radiator)
2.4GHz11b: 17±1.5 dBm
11g: 14±1.5 dBm
11n: 14±1.5 dBm
5GHz 11a: 12±1.5 dBm
11n: 12±1.5 dBm
Wireless Management Features
Wireless Modes AP, Client, WDS, Universal Repeater
Encryption Security
WEP (64/128-bit)
WPA-PSK (TKIP) / WPA2-PSK (AES)
WPA (TKIP) / WPA2 (AES)
802.1x authentication
Provide wireless LAN ACL (Access Control List) filtering Wireless Security
Wireless MAC address filtering