L2tp – PLANET WDRT-730 User Manual
Page 38
User Manual of WDRT-730
-31-
Connection ID
Please input the connection ID here if the local ISP asks you to do so
or you can just leave it blank. (optional)
MTU
Please input the MTU value of your network connection here. If you
don’t know, please keep the default value.
BEZEQ-ISRAEL
If you are connecting to the BEZEQ network in Israel, please enable
this function.
Connection Type
You can select Continuous to keep the connection be always on. Or
select Connect on Demand, then you can configure Idle Time Out
below to stop the connection when the network traffic is not sending
or receiving in a period of idle time. Or you can also select Manual.
Then click Connect or Disconnect buttons to connect or disconnect
to the ISP immediately.
Table 5-6
Sometimes the connection cannot be terminated although you specify a time to Idle
Time Out, since some applications are visiting the Internet continually in the
background.
5.2.2.5.
L2TP
If your ISP provides L2TP connection, please select L2TP. And enter the following parameters (
):