PLANET WDRT-730 - Manual (Page 64)

User Manual of WDRT-730
-57-
Figure 5-36
Object Description
Rule Name Please give a name to this QoS rule (up to 15 alphanumerical characters).
Bandwidth Set the bandwidth limitation of this QoS rule. You have to select the data
direction of this rule (Upload or Download), and the speed of bandwidth
limitation in Kbps, then select the type of QoS: Guarantee (guaranteed
usable bandwidth for this rule) or Maximum (the maximum bandwidth for
the application allowed by this rule).
Local IP Address Specify the local (source) IP address that will be affected by this rule.
Please input the starting IP address in the left field, and input the end IP
address in the right field to define a range of IP addresses, or just input the
IP address in the left field to define a single IP address.
Local Port Range Please input the range of local (source) port number that will be affected
by this rule. If you want to apply this rule on port 80 to 90, please
input ’80-90’; if you want to apply this rule on a single port, just input the
single port number, like ‘80’
Remote IP Address Specify the remote (destination) IP address that will be affected by this
rule. Please input the starting IP address in the left field, and input the end
IP address in the right field to define a range of IP addresses, or just input
the IP address in the left field to define a single IP address.
Remote Port
Range Please input the range of remote (destination) port number that will be
affected by this rule. If you want to apply this rule on port 80 to 90, please
input ’80-90’; if you want to apply this rule on a single port, just input the
single port number, like ‘80’. If the remote (destination) IP address and /or
port number is universal, just leave it blank.
Traffic Type You can select a specific traffic type for this rule, if you want to make this