PLANET WDRT-730 - Manual (Page 35)

User Manual of WDRT-730
-28-
Object Description
IP Address Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask Enter the subnet Mask in dotted-decimal notation provided by your
ISP, usually is 255.255.255.0
Default Gateway (Optional) Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
TTL Choose the number of TTL if the local ISP requires you to do so.
Table 5-4
5.2.2.3. PPPoE
If your local ISP provides a PPPoE connection, choose PPPoE and fill the necessary parameters
below. ( Figure 5-11 ):
Figure 5-11 WAN – PPPoE
Object Description
User Name / Password Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Service Name (Optional) Please give a name to this Internet service.
MTU Please input the MTU value of your network connection here. If you
don’t know, please keep the default value.
Connect Type You can select Continuous to keep the connection be always on. Or
select Connect on Demand, then you can configure Idle Time Out