PLANET WDRT-730 - Manual (Page 31)

User Manual of WDRT-730
-24-
Figure 5-4 Time settings
Object Description
Time Zone Select your local time zone from this pull-down list.
Time Server Address Enter the address for the NTP Server here. The Router will get the
time from the NTP Server preferentially.
Daylight Savings If you want to enable daylight savings setting, please check Enable
box, and set the duration of daylight setting.
Table 5-1
5.2.1.2. Password Settings
You can change the factory default password of the Router on the screen as shown in Figure 5-5
Figure 5-5 Password
Please input the current password once and the new password twice to confirm.
It is strongly recommended that you should change the factory default password of
the Router. The new password must not exceed 30 characters in length and not
include any spaces.
Click the APPLY button to save the changes.