PLANET WDAP-C7400 - Manual (Page 47)

User Manual of WDAP-C7400
-39-
 Refresh: Click this button to update the log.
 Clear: Click this button to clear the current log.
5.6.5 Log Settings
The section is to configure the remote system log server. Click “Add” to add the log server.
Figure 5-23 Log Settings
The page includes the following fields:
Object Description
 Log Server IP:
Enter the remote log server’s IP address.
 Log Server Port:
Enter the remote log server’s service port.
 Enable: Check the box to enable the remote log server.
5.6.6 Configuration Management
This section allows you to back up current settings or to restore the previous settings configured on the device.
Choose menu “Tools  Backup Settings  Backup & Restore” to back up or reset the configuration of the
WDAP-C7400.
Once you have configured the Wireless AP the way you want it, you can save these settings to a configuration
file on your local hard drive that can later be imported to your Wireless AP in case the device is restored to
factory default settings.