PLANET WDAP-C7400 - Manual (Page 32)

User Manual of WDAP-C7400
-24-
different AP.
 SSID: SSID (Service Set Identifier) is the unique name of the wireless network. It is
recommended to modify this name for wireless client to recognize wireless
signals.
 Country:
Select your country from the list and the supported channel list will be
modified to the channels that allows in your country.
11b/g
mixed
Mode Allow the 11b/g-compliant client device to connect with the AP
with auto-negotiation speed, and 11n wireless client to connect
the device with 11g speed.
11b Mode
Allow the wireless client to connect with the device in 11b mode
at the maximum speed of 11Mbps.
11g Mode
Allow the 11g/11n-compliant client device to connect with the
AP at the maximum speed of 54Mbps.
 Wireless Mode:
11b/g/n
mixed
Mode
Allow 11b/g/n-compliant client device to connect with the AP
with auto- negotiation speed. The maximum speed is 450Mbps.
 Channel: Specify the effective channel (from 1 to 13 according to different country’s
regulatory or set to Auto) of the wireless network.
This device supports the following channel:
America/ FCC: Chanel 1~11 (11 Channels)
Europe/ ETSI: Channel 1~13 (13 Channels)
※ The above channel list will vary according to different countries’
regulatory.
 Channel
Bandwidth:
Select the proper channel bandwidth to improve the wireless performance.
20M bandwidth can improve the anti-jamming ability of the wireless device.
40M (20/40) bandwidth can improve the flux of 11N client.
 Extension
Channel:
To increase data throughput of wireless network, the extension channel range
is used in 11n mode.
 WMM Capable: To enhance wireless multimedia transfer performance (on-line video and
voice). If you are not clear about this, enable it.
 APSD Capable: It is used for auto power-saved service.
The default is enabled.
 Max Client: To set the maximum number of clients that may connect to this device.
The default suggested value is 30, and the max. is 124.