PLANET WDAP-C7400 - Manual (Page 14)

User Manual of WDAP-C7400
-6-
1.4 Product Specifications
Product
WDAP-C7400
900Mbps Dual Band 802.11n Wireless Ceiling Mount Access Point
Hardware Specifications
PoE Port:
1 x 10/100/1000Mbps Auto MDI/MDI-X RJ45 port
※ IEEE 802.3at compliant PD Port Interface
LAN Port: 1 x 10/100/1000Mbps Auto MDI/MDI-X RJ45 port
PoE IEEE 802.3at
Antenna Built-in 3dBi dual-band antenna x3
Reset Button
Reset button at rear panel
Press over 7 seconds to reset the device to factory default
LED Indicators PWR, 2.4GHz, 5GHz LED
Material Plastic
Dimensions 200 x 200 x 40mm (L x W x H)
Weight 450g
Power Requirements 52~56V DC, 0.7A (max.), IEEE 802.3at 30W power source is required.
Power Consumption 25W (max.)
Wireless interface Specifications
Standard
IEEE 802.11a/b/g/n
IEEE 802.3u/af/at
Frequency Band
Simultaneous 2.4 GHz and 5 GHz
2.4GHz: 2.412~2.484GHz
5GHz: 5.745~5.825GHz
Operating Channel
2.4GHz:
America/ FCC: 2.412~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
5GHz:
IEEE 802.11a: 149, 153, 157, 161, 165
IEEE 802.11a/n: 149, 157
5GHz channel list will vary in different countries according to its Regulatory.
Channel Width 20 or 20/40MHz
Data Rate
2.4GHz: up to 450Mbps
5GHz: up to 450Mbps
Transmission Distance
Indoor up to 100m
Outdoor up to 3.5Km (based on wall mount deployment, and the effective distance will
vary in various environments.)
11a 1 - 54Mbps 21~22dBm
11b 1 - 11Mbps 26.5~27.5dBm
6 - 9Mbps 26dBm
12 - 18Mbps 25dBm
24 - 36Mbps 24.5dBm
11g
48 - 54Mbps 23.5dBm
RF Power
(Intentional Radiator)
11n MCS 0-7 23dBm