PLANET WDAP-C7400 - Manual (Page 33)

User Manual of WDAP-C7400
-25-
5.3.2 Basic – 5GHz
Figure 5-8 Wireless Basic Settings – 5GHz
The page includes the following fields:
Object Description
 Select Wireless
Network:
Select one of the Multiple-SSID for the network configuration.
There are max. 2 SSID supported.
※ Any settings modified in this page will be applied to all SSIDs.
 Wireless:
Click “Enable” to enable the wireless signal.
 SSID Broadcast: When you select “Disable SSID broadcast”, AP will not broadcast its own
SSID. If there is a wireless connection request, you need to input SSID
manually.
 AP Isolation The access control feature based on wireless MAC address.
When this feature is enabled, each of your wireless clients will be in its own
virtual network and will not be able to communicate with each other. This
feature is to isolate the communication of wireless clients connected with a
different AP.
 SSID: SSID (Service Set Identifier) is the unique name of the wireless network. It is
recommended to modify this name for wireless client to recognize wireless
signals.
 Country: Select your country from the list and the supported channel list will be