PLANET WDAP-C7400 - Manual (Page 30)

User Manual of WDAP-C7400
-22-
5.2 Network
“Network” page about the LAN setting.
5.2.1 LAN Settings
On the LAN Settings page, you can configure the IP parameters of the LAN on the screen as shown below.
Figure 5-6 LAN settings
The page includes the following fields:
Object Description
 IP Address:
Enter the IP address of your AP in dotted-decimal notation (factory default:
192.168.1.253).
 Subnet Mask:
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
 Gateway:
(Optional.) Suggest to input the IP address of the LAN port of the Router, default
value is 192.168.1.1
 Preferred DNS
Server:
Enter the Preferred Domain Name System provided from your ISP.
 Alternate DNS
Server(Option
al): Enter the Alternate Domain Name System provided from your ISP.
1. If you change the IP Address of LAN, you must use the new IP Address to
login the AP.
2. When the IP address of the WDAP-C7400 is changed, the clients on the
network often need to wait for a while or even reboot before they can access
the new IP address. For an immediate access to the AP, please flush the
netbios cache on the client computer by running the “nbtstat –r” command
before using the device name of the WDAP-C7400 to access its Web
Management page.