PLANET IGT-902 - Manual (Page 8)

User’s Manual of IGT-90x
• Management VLAN
¾ Quality of Service
„
Ingress/Egress Bandwidth control on TP / Fiber port
„ 4 priority queues, strict priority and Weighted Round Robin (WRR)
„ Traffic classification by:
• IEEE 802.1p Class of Service
• IP DSCP priority
• IP Address priority
¾ Management
„
Built-in IP-based Web interface for remote management
„ SNMP v1 / v2c and 4 RMON groups
„ Event trap and SNMP trap support
„ Manual IP address setting / DHCP client for IP address assignment
„ TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
„ 16 TCP / UDP Filter groups
„ Password setting, IP setting and devices description setting through Planet Smart discovery utility
„ Firmware upgrade via remote Web interface
„ Reset Button at the front panel for the factory default reset
1.6 Product Specification
Product IGT-902 IGT-902T IGT-902S IGT-902TS IGT-905A
Hardware Specification
Copper Interface 1 x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
Optic Interface SC SFP
Optical Mode Multi-mode Single mode
Vary on
module
Optic Wavelength 850nm
1310nm -*
MAX. -4 dBm
-3 dm -*
Launch
Power(dBm)
Min. -9.5 dBm
-9.5dBm -*
Receive Sensitivity -13.5 dBm
-14.4 dBm -*
Maximum Input power -18 dBm
-20 dBm -*
Twisted-pair
10/20Mbps for Half / Full-Duplex
100/200Mbps for Half / Full-Duplex
2000Mbps for Full-Duplex
Speed
Fiber-optic 2000Mbps for Full-Duplex
Twisted-pair
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
1000Base-T: 4-pair STP Cat 5,6 up to 100m
Cable
Fiber-optic
Cable
y 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
y 9/125μm single-mode cable, provides long distance for
10/15/20/30/40/50/60/70/120km (very on fiber transceiver or SFP module)
LED indicator
Power: P1, P2, Fault
TP: LNK/ACT, 1000
Fiber: LNK/ACT
-8-