PLANET IGT-902 - Manual (Page 17)

User’s Manual of IGT-90x
Please refers to APPENDIX-A for detailed wiring information of the Industrial Managed Media
Converter. To prevent from optic acceptor malfunction, check the both wires / transmitter before
power on the Industrial Managed Media Converter.
IGT-905A Installation:
IGT-905A is with high reliability and flexibility to extend the distance from 220m to 120Km. It depends on the Gigabit mini
GBIC modules. The SFP transceivers are hot-plug and hot-swappable. You can plug-in and out the transceiver to/from
any SFP port without having to power down the Industrial Managed Media Converter.
To install IGT-905A with 1000Base-SX / LX SFP, simply complete the following steps:
Step 1 : Precede with the steps 4 and steps 5 of session 2.2.3 Stand-alone Installation to connect the network cabling
and supply power to your Industrial Managed Media Converter.
Step 2 : Slot in the 1000Base-SX / LX SFP. Make sure both side of the SFP transceiver are with the same media type, for
example: 1000Base-SX / 220m & 550m to 1000Base-SX / 220m & 550m, 1000Base-LX / 10km to 1000Base-LX /
10km
Step 3: Connect the fiber cable. Attach the duplex LC connector on the network cable into the SFP transceiver.
Figure 2-8 IGT- 905A stand alone installation
It recommends using PLANET MGB series 1000Base-SX / LX / LX WDM SFP on the IGT-905A. If
you insert a SFP transceiver that is not supported, the IGT-905A will not recognize it.
The following list the available Modules for IGT-905A
MGB-GT SFP-Port 1000Base-T mini-GBIC module
MGB-SX SFP-Port 1000Base-SX mini-GBIC module
MGB-LX SFP-Port 1000Base-LX mini-GBIC module
MGB-L30 SFP-Port 1000Base-LX mini-GBIC module -30KM
MGB-L50 SFP-Port 1000Base-LX mini-GBIC module -50KM
MGB-L70 SFP-Port 1000Base-LX mini-GBIC module -70KM
MGB-L120 SFP-Port 1000Base-LX mini-GBIC module -120KM
-17-