PLANET IGT-902 - Manual (Page 11)

User’s Manual of IGT-90x
2.1.1 LED Indicators
LED Color Function
P1 Green Lit Indicate the power 1 has power.
P2 Green Lit Indicate the power 2 has power.
FAULT Green Lit Indicate the either power 1 or power 2 has no power.
Lights
To indicate that the Fiber Optical Port is successfully connecting to the
network at 1000Mbps.
Fiber
LNK /ACT
Green
Blinks To indicate the Fiber Optical Port is receiving or sending data.
TP 1000 Lights
To indicate that the Gigabit Ethernet Port is successfully connecting to the
network at 1000Mbps. OFF indicate the Gigabit Ethernet Port is
successfully connecting to the network at 10/100Mbps.
Lights
To indicate that the Gigabit Ethernet Port is successfully connecting to the
network at 10/100/1000Mbps.
TP
LNK /ACT
Green
Blinks To indicate the Gigabit Ethernet Port is receiving or sending data.
To press and release the RESET button. The IGT-90X will back to the factory default mode. Be sure that you
backup the current configuration of IGT-90X; else the entire configuration will be erased when pressing the
“RESET” button.
• Press and release the RESET button shortly, the device will be rebooted.
• Press the RESET button about 10 seconds and release, the device will back to the factory default
mode; the entire configuration will be erased to default setting.
2.1.2 IGT-90X Rear Panel
The upper panel of the Industrial Managed Media Converter consist one terminal block connector within two DC power
inputs.
Figure 2-6 shows the upper panel of the Industrial Managed Media Converter.
■ IGT-90X series Upper Panel
Figure 2-6 Upper Panel of IGT-90X
-11-