EMC QLogic - Manual (Page 94)

A
A-2 EMC Fibre Channel with QLogic HBAs in the Windows Environment
Third-Party Software
QLogic SANSurfer SANBlade Manager
Stratus ftServers are not supported using the qLogic SANSurfer SANBlade
Manager Software or Agents.
EMC has approved the use of a specialized version of the QLogic
SANSurfer SANBlade Manager for use with attached EMC
Symmetrix and CLARiiON storage arrays. Only the versions listed
below should be used
; these versions are posted in the EMC section on
the QLogic website.
This Windows utility provides information on the installed QLogic
HBAs, driver versions, mapped targets, statistics, and configuration
settings. It also has a feature to update the HBA firmware/BIOS and
NVRAM. (You should obtain the latest EMC-approved
firmware/BIOS and NVRAM files from the QLogic website. Refer to
Downloading QLogic Drivers and Firmware on page 2-2 for
instructions.)
For information on the use and features of the QLogic SANSurfer
SANBlade Manager utility, refer to the documentation posted with
this utility.
QLogic_Windows.book Page 2 Thursday, March 10, 2005 10:31 AM