EMC QLogic - Manual (Page 13)

Installing and Configuring the HBA Driver 2-1
2
Invisible Body Tag
This chapter describes the procedures for installing an
EMC-approved QLogic host bus adapter (HBA) into a Windows NT,
Windows 2000, or Windows 2003 host environment and configuring
the Windows host for connection to an EMC storage array over Fibre
Channel.
◆ Introduction ........................................................................................2-2
◆ Installing an HBA...............................................................................2-3
◆ EMC HBA Settings.............................................................................2-8
◆ Installing the HBA Driver...............................................................2-14
◆ Updating the HBA Driver in a Windows 2000 or Windows 2003
Host ....................................................................................................2-18
◆ Upgrading to Windows 2003 from Windows 2000 or
Windows NT 4.0...............................................................................2-20
◆ Replacing an HBA............................................................................2-21
Installing and
Configuring the HBA
Driver
QLogic_Windows.book Page 1 Thursday, March 10, 2005 10:31 AM