EMC QLogic User Manual
Page 3
EMC Fibre Channel with QLogic HBAs in the Windows Environment
iii
........................................................................................................................... vii
Understanding Persistent Binding in a Fabric Environment .... 1-2
Installing and Configuring the HBA Driver
Installing an HBA ............................................................................ 2-3
EMC HBA Settings .......................................................................... 2-8
Pre-Configured Settings........................................................... 2-8
Configuring NVRAM for Stratus ftServers .......................... 2-9
Fibre-Down Servers with Embedded QLogic HBAs......... 2-10
Updating Firmware/BIOS and Applying NVRAM
Settings ..................................................................................... 2-10
Manually Setting the HBA Data Rate .................................. 2-12
Setting the Topology for QLA22xx/23xx and Windows .. 2-13
Installing the HBA Driver............................................................. 2-14
Driver Revision History......................................................... 2-14
Where to Find the Driver....................................................... 2-14
Windows 2003 STORPort Updates ...................................... 2-15
Extended Error Logging by QLogic Drivers ...................... 2-15
Installation Procedure for Windows NT Hosts.................. 2-15
Contents
QLogic_Windows.book Page iii Thursday, March 10, 2005 10:31 AM