EMC QLogic - Manual (Page 86)

4
4-12 EMC Fibre Channel with QLogic HBAs in the Windows Environment
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
You may add as many targets as you need to here. If you need to
enter CHAP security for any of the targets, click Config Authentica-
tion
at the bottom of the dialog.
You can set a default name and secret for all targets, or click the indi-
vidual target and enter unique name and secret settings for that tar-
get. Note that initiator CHAP settings do not get masked and could
be compromised if an unauthorized user accesses the SANsurfer
workstation.
After CHAP settings are made, click OK. To save all target settings,
click the Save button. You will be prompted for the SANsurfer secu-
QLogic_Windows.book Page 12 Thursday, March 10, 2005 10:31 AM