EMC QLogic - Manual (Page 37)

Configuring an EMC Boot Device 3-1
3
Invisible Body Tag
Windows hosts have been qualified for booting from EMC storage
array devices interfaced through Fibre Channel as described in the
EMC Support Matrix. This chapter describes the process to configure a
storage array device as a boot device.
◆ Introduction ........................................................................................3-2
◆ Configuring a Symmetrix Boot Device ...........................................3-5
◆ Configuring a CLARiiON Boot Device.........................................3-14
◆ Boot Time and LUN Availability ...................................................3-35
◆ Replacing a Boot HBA .....................................................................3-36
◆ How a Server Responds to Failure in the Boot LUN Path .........3-37
◆ Known Issues....................................................................................3-38
Configuring an EMC
Boot Device
QLogic_Windows.book Page 1 Thursday, March 10, 2005 10:31 AM