PLANET ICA-510 - Manual (Page 16)

Cam Viewer Lite
page- 15
4. Main Console
When Cam Viewer Lite running, you will see the main console in the start. You can refer to the
sections below to know how to operate Cam Viewer Lite as you want.
The main operation system. To activate, schedule recording, setup smart guard
and configure system setting.
Exit: Shut down SCB Video Surveil- lance System or log out current user.
Minimize: Minimize the Main Con- sole.
Camera Number / Camera Name: Numbers shown as the port connected; rename the cameras
in Config > General Setting.
Screen Division: Allocate the sub-screen displays of cameras by clicking on the icon of desired
layout. Quick switch to single camera display by double click the particular sub-screen. Double
click the single camera display again to regain previous screen division layout.
Camera Selection: Choose an area on the display screen and then click on the number of the
camera to put it on the chosen area.