PLANET WGSD-10020 - Manual (Page 73)

User’s Manual of WGSD-10020 Series
73
Parameter tags: , etc. These tags identify parameters for the specific section, module and
group. The tag is used for table entries.
Configuration parameters are represented as attribute values. When saving the configuration from the switch, the entire
configuration including syntax descriptions is included in the file. The file may then be modified using an editor and loaded to a
switch.
The examples below shows a small configuration file only including configuration of the MAC address age time and the learning
mode per port. When loading this file, only the included parameters will be changed. This means that the age time will be set to
200 and the learn mode will be set to automatic.
 Save Configuration
1. Press the “Save Configuration” button to save the current configuration in manager workstation. The following screens in
Figure 4-2-24 & 4-2-25 appear
Figure 4-2-24 File Download screen