PLANET WGSD-10020 - Manual (Page 177)

User’s Manual of WGSD-10020 Series
177
4.9.3 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in Figure 4-9-2 appears.
Figure 4-9-2 QoS Ingress Port Classification page screenshot
The page includes the following fields:
Object Description
• Port
The port number for which the configuration below applies.
• QoS Class Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
• DP Level
Controls the default DP level, i.e., the DP level for frames not classified in any
other way.
•
PCP Controls the default PCP for untagged frames.
•
DEI Controls the default DEI for untagged frames.
•
Tag Class Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
For more detail information, please refer to chapter 4.9.3.1.
•
DSCP Based Click to Enable DSCP Based QoS Ingress Port Classification.