PLANET WGSD-10020 - Manual (Page 487)

User’s Manual of WGSD-10020 Series
487
Example:
Enable multicast storm control in 2fps
WGSD-10020HP:/> QoS Storm multicast enable 2
QoS QCL Lookup
Description:
Lookup QoS Control List.
Syntax:
QoS QCL Lookup []
Parameters:
: QCE ID (1-256), default: Next available ID
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
WGSD-10020HP:/> QoS Storm multicast enable 2
QoS QCL Status
Description:
Show QCL status. This can be used to display if there is any conflict in QCE for differnet user types.
Syntax:
QoS QCL status [combined|static|voice_vlan|conflicts]
Parameters:
combined|static|voice_vlan|conflicts: combined : Shows the combined status
static : Shows the static user configured status
voice_vlan : Shows the status by Voice VLAN
conflicts : Shows all conflict status
(default : Shows the combined status)