PLANET WGSD-10020 - Manual (Page 309)

User’s Manual of WGSD-10020 Series
309
4.16.3 Port Configuration
This section allows the user to inspect and configure the current PoE port settings , screen in Figure 4-16-3 appears.
Figure 4-16-3 Power over Ethernet Configuration screenshot
The page includes the following fields:
Object Description
• PoE Mode
There are three modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
Schedule: enable PoE function in schedule mode.
• Schedule
Indicates the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
• Priority
The Priority represents the ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in the case where the remote devices requires uses more
power than power supply can deliver. In this case the port with the lowest priority
will be turn off starting from the port with the lowest port number.
• Maximum Power
The Maximum Power value contains a numerical value that indicates the
maximum power in watts that can be delived to a remote device.
Per port maximum value must less than 30.8 watts, total ports values must less