PLANET FNSW-2402S - Manual (Page 4)

2 3
ported
• 2 open slots for 10/100Base-TX/FX fiber-optic interface with various connec-
tion media and distances
• Auto-MDI/MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame
flow control (full-duplex)
• High performance Store and Forward architecture, broadcast storm control,
runt/CRC filtering eliminates erroneous packets to optimize the network band-
width
• 6K MAC address table, automatic source address learning and ageing
• 512K bytes shared data memory buffering
• Console interface for Switch basic management and setup
• Support port-based VLAN and IEEE 802.1Q VLAN function.
• Support up to 7 Trunk groups, each trunk for up to maximum 4 port with
800Mbps bandwidth
• Support rate control on each port
1.4 Product Specifications
Model FNSW-2402S
Hardware Specification
Network ports 24 10/100Base-T RJ-45 MDI/MDI-X ports
Module slot 2 open slot for 10/100Base-TX/FX fiber-optic interface
Console port 1 RS-232 DB-9 male
Dimensions 440 x 200 x 44 mm (1U height)
Weight 2.6 kg
Power Requirement 100~240 (±10%) VAC, 50-60 (±3) Hz
Power Consumption 30 Watts maximum / 100 BTU/hr maximum
Switch Specification
Switch architecture Store-and-forward
Address Table 6K entries, auto learning/ageing
Shared data Buffer 512K bytes