Avago Technologies LSI7104EP-LC - Manual (Page 61)

Main Menu 4-5
Ver. 2.0 Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
current page before new entries may be viewed or modified. A pop-up
confirmation window asks to store or discard changes, if needed.
4.4.3 Device Properties Menu
The Device Properties menu allows you to view and update individual
device settings for an adapter.
Note: The number of fields on the menu requires that you scroll
left/right to view all the information. When accessing this
menu, use the Home/End keys to scroll to columns
currently not displayed. The scroll indicator on the bottom
of the menu shows the position of the cursor relative to the
first and last columns.
4.4.4 Boot Adapter List Menu
The Boot Adapter List menu specifies the order in which adapters boot
when more than one LSI Logic host adapter is in a system. Up to four
adapters in a system can be selected as bootable. Only one of the four
bootable adapters can control a Boot Volume.
To select this menu:
1. Press F2 while on the Main menu to move the cursor to the menu area.
2. Move the cursor to Boot Adapter List with the arrow keys.
3. Press Enter.
Adapters can be added or deleted using this menu. To add an adapter
to the boot list, press the Insert key while on the Boot Adapter List. Use
the arrow keys to select the desired adapter, and press Enter to add it
to the end of the Boot Adapter List.
To remove an adapter from the boot list, press the Delete key while the
desired adapter is selected in the Boot Adapter List. You can also change
the boot order by using the “+” or “
−” keys. For example, place the cursor
on the adapter that you want to change, and use the “+” or “
−” key to raise
or lower the boot order, respectively.