Avago Technologies LSI7104EP-LC - Manual (Page 18)

1-4 Installation Procedures
Ver. 2.1 Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
Refer to the user’s manual supplied with your computer to
confirm the location of the PCI slots.
This host adapter requires a 32-bit or 64-bit PCI slot that allows
bus master operation. If a 32-bit PCI slot is used, the portion of
the J1 connector opposite the bracket remains uninserted.
Refer to
Figure 1.2 for details.
Note: For this host adapter to function as a 64-bit device, it must
be inserted into a 64-bit PCI slot. If the host adapter is
inserted into a 32-bit PCI slot, it will function as a 32-bit
device. In addition, the PCI-X slot must be 3.3 V-keyed for
the LSI7104XP-LC or LSI7204XP-LC cards to plug in.
Step 6. On the back of the computer, remove the blank bracket panel,
which is aligned with the PCI slot you intend to use. Save the
bracket screw.
Figure 1.1 Hardware Connections for the LSI Logic Host Adapter
Step 7. Carefully insert PCI Bus Edge Connector J1 (see Figure 1.1 ) of
the host adapter into the PCI slot.
SFP
Transceiver
Fibre Channel
Link Activity/
Link Fault LED
PCI Bus Edge Connector J1
LSI Logic Host Adapter