Avago Technologies LSI7104EP-LC - Manual (Page 31)

Physical Characteristics 2-11
Ver. 2.1 Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
The component height on the top and bottom of the board conforms to
the PCI-X/133 Specification, Revision 1.0a.
Figure 2.3 illustrates the
major components on the LSI7104XP-LC.
Figure 2.3 LSI7104XP-LC Host Adapter Configuration
2.8.4 LSI7104XP-LC Connector and Indicator LEDs
The LSI7104XP-LC I/O bracket is configured as shown in Figure 2.4 . The
LC connector provides the connection from the adapter channel to the
FC subsystem. This host adapter features two LED indicators. The LEDs
indicate Port 0 status. Refer to
Table 2.7 for an explanation of LED color
codes.
J1_T
LSIFC949X
SRAM (X2)
Osc.
Port 0, SFP
Voltage
Regulator
Flash
Voltage
Regulator
LS
I710
4XP
-L
C