Avago Technologies LSI7104EP-LC - Manual (Page 52)

3-8 Firmware Installation Procedure
Ver. 2.1 Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
To update the firmware, select option a - Update Firmware.
Figure 3.5 MPTUtil Options
Step 6. When prompted, type the filename of the BIOS/Fcode update.
The update process will commence, and will complete in about
20–30 seconds.
Step 7. Exit the MPTUtil utility using the menu option q - Quit.
3.4 Advanced User: Adjusting Default Firmware Settings
Occasionally, a user may find it necessary to adjust default firmware
parameters set by LSI Logic during the original manufacturing process.
Adjustments to these parameters will affect future behavior of the
LSI Logic Adapter, and should be reserved for advanced users who fully
understand the implications of such changes.