Inserting the lsi logic host adapter, R to, Figure 1.2 – Avago Technologies LSI7104EP-LC User Manual
Page 19
Detailed Installation Procedure
1-5
Ver. 2.1
Copyright © 2005-2006 by LSI Logic Corporation. All rights reserved.
Make sure the edge connector is properly aligned before
pressing the board into place as shown in
. The
bracket around the Small Form-Factor Pluggable (SFP)
Transceiver cages should fit where you removed the blank
panel.
Figure 1.2
Inserting the LSI Logic Host Adapter
Step 8.
Secure the board with the bracket screw (see
), then
make the external FC link connection.
Bracket Screw
32-Bit PCI Slots
64-Bit PCI Slots
This manual is related to the following products: