Figure 8 – Avago Technologies MegaRAID SAS 9260-16i User Manual
Page 12
Page 12
LSI Corporation
|
July 2010
MegaRAID Remote Kit for the LSIiBBU06, LSIiBBU07, and LSIiBBU08 Intelligent Battery
Backup Units Quick Installation Guide
Connecting the LSIiBBU07 Remotely to the MegaRAID SAS RAID Controller
Figure 8: Installing the MegaRAID SAS Controller
4. Press down gently but firmly to seat the card correctly in the slot.
5. Secure the controller to the computer chassis with the bracket screw.
6. Reinstall the computer cover and reattach the power cords.
7. Turn on the power to the computer.
NOTE: Refer to the MegaRAID SAS Software User’s Guide for information about running
the RAID configuration utility and installing software drivers.
Edge of Motherboard
Bracket Screw
Edge of
Motherboard
Press Here
85021-14
Press Here
This manual is related to the following products: