Amprobe Multitest-1000 Continuity-Tester - Manual (Page 44)

5.2. RECALL: "RCL" KEY
If you want to recall the stored test results proceed as follows:
1.
Press the RCL/ESC key.
RCL
ESC
)
MEM
3
Pla
02
If the memory of the instrument is not
empty it displays the screen alongside.
Number of the memory location in which the
measurement result was stored.
Value of the parameter PLA related to the
saved measurement
2.
Use the & keys to select the memory location number to be
displayed.
3. Press
the DISP key to display the test result related to the selected
memory location.
DISP
4.
Use the & keys again if you want to display again the numbers of
memory locations.
RCL
ESC Press RCL/ESC key at any time to leave the memory menu and go back
to the measurement selected.