Amprobe Multitest-1000 Continuity-Tester - Manual (Page 10)

3.5. HOW TO SET LANGUAGE AND MEASUREMENT UNIT
It is possible to set the language and the distance measurement unit (in earth resistivity)
by following this procedure:
1. While pressing the FUNC button switch ON the instrument (the rotary switch position
isn't relevant).
2.
)
LA
E
The following screen will appear.
3. Choose the desired language between English, Spanish, German and Italian by
pressing the and keys (appear En, ES, dE, IT).
4.
) Push the SAVE key confirming the
choice. The instrument will display the
following screen.
)
OK
LA
E
Push ESC key leaving language
selection menu without confirming any
change.
5.
)
le
m
The instrument will display the following
screen.
6. Choose the desired distance measurement unit between meter and feet that change by
pushing and keys (appear m and ft).
7.