Amprobe DM-111S Current-Data-Logger - Manual (Page 6)

DMIIIS
EN - 4
1.3. DURING USE
Please read carefully:
CAUTION
Should you fail to keep to the prescribed instructions you could damage the
instrument and/or its components or endanger your safety.
 When the instrument is connected to the circuit under test, do not touch any unused
terminal.
 When measuring current, other currents located near the leads may affect the
measuring accuracy.
 When measuring current, always position the wire in the very middle of the jaws in
order to obtain the highest accuracy.
 A measured value remains constant if the "HOLD" function is active. Should you notice
that the measured value remains unchanged, disable the “HOLD” function.
1.4.
AFTER USE
 After use, turn off the instrument by pressing ON/OFF for a few seconds.
 If you will not be using the instrument for long periods of time use the storage
instructions described at paragraph 3.4.