Amprobe DM-111S Current-Data-Logger - Manual (Page 40)

DMIIIS
EN - 38
8. DURING A RECORDING
If during a recording the external power supply is de-energized, the instrument will
continue the recording using the internal battery power until the batteries are exhausted
(the data stored up to the point the instrument shuts down won’t get lost). For this we
recommend you ALWAYS insert a new set of batteries before a long recording.
The instrument uses sophisticated algorithms to prolong the battery life. Particularly if the
instrument is recording or is measuring energy (and the external power supply is not
connected), after about 5 minutes from the last key pressure or switch rotation the
instrument starts a special procedure to save the batteries ("ECONOMY MODE"): the
instrument keeps recording but the display is turned off.
During a recording the following are disabled:
 AUTOPOWER OFF function
 ON/OFF key
 HOLD key
 SAVE key
Press the MENU key and the following screen will appear:
INFO REC n XX
ST ART
09.18.01 11:35
INT PERIOD: 15min
REC PERIODS:00004
REC TIM E:139d.02h
HARM REC: (ON)
ANOM REC: (ON)
N ANOM ALIES: 00000
Recording
This page includes:
1. START Date and Time
2. Integration Period
3. Actual Number of Elapsed Integration Periods
4. Actual Recording Time
5. Status of Harmonic Flag
6. Status of Voltage Anomalies Flag
7. Number of Voltage anomalies occurred during the recording