Emerson Liebert iCOM - Manual (Page 57)

User Menu Parameters
51
7.0 U
SER
M
ENU
P
ARAMETERS
User menus report general cooling unit operations and status. The password for the user menu is
1490.
The iCOM control firmware is being updated constantly. As a result, the User menu parameter tables
in this manual may be slightly different than what is shown on your cooling unit's display. Please
check www.liebert.com for the latest iCOM User manual updates.
Spare Part List—Large Display Only
Displays the various Liebert part numbers for all parts in the cooling unit to simplify ordering
replacement parts.
Table 12 Setpoints parameters
Function
Read/
Write
Range
Imperial (metric) Large Display Small Display
Page 1 of 1
Password
PASSWORD W -
Temperature Setpoint TEMP SET W 41-104°F (5-40°C)
Humidity Setpoint HUM SET W
20-80%
(settings lower than 19%
will be forced to 20)
Humidity Control Type HUM CTRL W
Relative, Compensated,
Predictive
Supply Limit SUP LIM W Enabled, Disabled
Supply Limit Temp Value SUP TEMP W 41-77°F (5-25°C)
Backup Temperature
Setpoint
BACK TPS W 41-104°F (5-40°C)
Table 13 Spare part list parameters—large display only
Function
Read/
Write
Range
Imperial (metric) Large Display Small Display
Page 1 of 1
List of parts
N/A R -
Table 14 Event log parameters
Function
Read/
Write
Range
Imperial (metric) Large Display Small Display
Page 1 of 1
Last 400 events
Last 400 events R -
Table 15 View network parameters—large display only*
Function
Read/
Write
Range
Imperial (metric) Large Display Small Display
Page 1 of 1
Status Unit 1—32 N/A R
AlarmOff, Manual, LocalOff, SystemOff,
AlarmStandby, Standby, TimerOff,
SystemOn, WarningOn, AlarmOn, Timer
* Permits viewing all units connected in a network. Viewable on a large display only.
°C / °F
% RH
SET
EVENT
LOG