Epson WorkForce C362B - Manual (Page 26)

26 Faxing a Document
Select Scan and Print Settings for Faxing
Use these settings to adjust the image quality of incoming and outgoing faxes,
select the paper size loaded in your WorkForce 310 Series, select the size at which
faxes are printed, and choose the printed reports you want.
1. Press the K
Fax
button, then press x
Menu
.
2. Press u or d to select Fax Setting , then
press
OK
.
3. Press u or d to select Scan & Print Setup , then press OK .
4. Adjust any of the following settings:
Setting and options Description
Resolution Sets the scan resolution and print quality of
incoming and outgoing faxes. Select Fine for
small print or detailed line art, Photo for pictures,
or Standard for basic faxes.
Contrast Sets the contrast when scanning and printing.
Positive values make the image darker, negative
values make the image lighter.
Paper Size Indicates the size of paper loaded in the
WorkForce 310 Series.
Auto Reduction Indicates whether large incoming faxes are
reduced to fit on the selected Paper Size (On), or
printed at their original size on multiple sheets
(Off).
Last Transmission Report Indicates when the WorkForce 310 Series prints
a report on the last transmitted fax. Select Off to
turn off report printing, On Error to print reports
only when an error occurs, or On Send to print
reports for every fax you send.
WF310_QG.book Page 26 Wednesday, April 8, 2009 2:14 PM